Electrical system for Haller X2 rear section

In this section you will find all the elements related to the electrical system installed in the tailgate section of the Haller X2 RCV compactors.

rs.

 

 

 

We can offer most of the elements of the electrical system for Haller X2 RCV collection trucks.

Here you can find the end of movement detectors, control panels for the pressing and elevation mechanisms and all the different pressing buttons.

We also have lighting groups that help make your  Haller compactor be completely visible in all working conditions.

Select the spare parts among the list of references you can find below or click on the menu on your left where your Haller compactor appears so that you could display a list of all the available spare parts for your machine.

If you cannot find on this website the parts you need, please contact our customer service at +34 968 676912 or send us an email to info@teclimur.es and we will help you locate the correct part for your Haller compactor.

!

Left electric distributing box for the tailgate roof in Haller X2 compactors

91159
Compatible with Haller original references 320547* / 320.547* / 320 547*

Applicable to Haller X2 compactors.

Electric distributing box placed on the left part of the roof on the press hydraulic cylinders.

Each Haller X2 needs 1 left distributing box.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Right electric distributing box for the tailgate roof in Haller X2 compactors

91160
Compatible with Haller original references 323716* / 323.716* / 323 716*

Applicable to Haller X2 compactors.

Electric distributing box placed on the left part of the roof on the press hydraulic cylinders.

Each Haller X2 needs 1 left distributing box.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Right rear press button panel for the tailgate in Haller X2

91161
Compatible with Haller original references 323432* / 323433* / 323.432* / 323.433* / 323 432* / 323 433*

Applicable to Haller X2 compactors.

Control panel for the rear operator placed on the right footboard for the control of the press mechanism, lights, ejection plate.

Equipped with an emergency stop butto

Each Haller X2 needs 1 right press button panel.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

End of movement switch with spring for the tailgate press plate cylinder in Haller X2 compactors

91162
Compatible with Haller original references 323507* / 323.507* / 323 507*

Applicable to Haller X2 compactors.

End of movement switch that controls the guide plate hydraulic cylinder movement. Placed on the upper part of the right cylinder.

Activated by means of an elastic spring.

Each Haller X2 needs 1 end of movement switch.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Stretching clamp for the end of movement switch with spring for the tailgate press plate cylinder in Haller X2 compactors

91172
Compatible with Haller original references 405747* / 405.747* / 405 747*

Applicable to Haller X2 compactors.

Stretching clamp for the fastening of the end of movement switch that controls the guide plate hydraulic cylinder movement. Placed on the upper part of the right cylinder.

Each Haller X2 needs 1 stretching clamp.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

End of movement switch with spring for the tailgate in Haller X2 compactors

91163
Compatible with Haller original references 744153* / 744.153* / 744 153*

Applicable to Haller X2 compactors.

End of movement switch placed on the left upper part of the rear frame.

Activated by means of an elastic spring.

Each Haller X2 needs 1 end of movement switch 91163.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Protection covering hood for the end of movement switch reference 91163 in Haller X2 compactors

91171
Compatible with Haller original references 100968* / 100.968* / 100 968*

Applicable to Haller X2 compactors.

Protection cover for the end of movement switch placed on the left upper part of the rear frame.

Each Haller X2 needs 1 protection covering hood.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Emergency stop press button with assembly box in Haller X2 compactors

91164
Compatible with Haller original references 323322* / 323321* / 323.322* / 323.321* / 323 322* / 323 321*

Applicable to Haller X2 compactors.

STOP press button to stop the truck in case of emergency.

Mounted on box.

Each Haller X2 needs 1 emergency stop button for the left footboard.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Black press button for buzzer in Haller X2 compactors

91165
Compatible with Haller original references 323128* / 323.128* / 323 128*

Applicable to Haller X2 compactors.

Press button for the audible buzzer alarm from the rear operator footboards.

Each Haller X2 needs 2 buzzer press buttons, one for each rear footboard.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Operating headlamp for the tailgate in Haller X2 compactors

91166
Compatible with Haller original references 350235* / 350.235* / 350 235*

Applicable to Haller X2 compactors.

Headlamp placed on the right upper part of the tailgate to light the work area behind the compactor.

Each Haller X2 needs 1 headlamp.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Upper tail lamp for Haller X2 compactors

91167
Compatible with Haller original references 350120* / 350.120* / 350 120*

Applicable to Haller X2 compactors.

Group of lamps: position lights, side marking lamps and brake lights placed on tha tailgate of Haller X2 compactors.

Each Haller X2 needs 4 tail lamps.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Licence plate lamp for Haller X2 / Faun compactors

91168
Compatible with Haller original references 350158* / 350.158* / 350 158*

Applicable to Haller X2 compactors.

Side blocks for the licence plate lighting, placed on the upper rear part of Haller X2 compactors.

Each Haller X2 needs 2 lighting locks for the licence plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Back up lamp for Haller X2 compactors

91169
Compatible with Haller original references 350090* / 350.090* / 350 090*

Applicable to Haller X2 compactors.

Rear block of white lights for the back up movement lighting, placed on the rear part of Haller X2 compactors.

Each Haller X2 needs 2 back up lights.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

12/24V fog lamp for Haller X2 compactors

91170
Compatible with Haller original references 350149* / 350.149* / 350 149*

Applicable to Haller X2 compactors.

Rear block of fog lights for the visibility in climate adverse conditions, placed on the rear part of Haller X2 compactors.

Each Haller X2 needs 2 fog lamps, one for each side of the tailgate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

24V rotating beam lamp for Haller X2 compactors

91173
Compatible with Haller original references 350220* /  350.220* / 350 220*

Applicable to Haller X2 compactors.

Rear rotating beam lamp placed on the left part of the tailgate roof.

Each Haller X2 needs 1 rotative lamp.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

24V rotative lamp slip-on pipe for Haller X2 compactors

91174
Compatible with Haller original references 350230* / 350.230* / 350 230*

Applicable to Haller X2 compactors.

Protection bar for the rear rotative beam lamp placed on the left part of the tailgate roof.

Each Haller X2 needs 1 slip-on pipe.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Inductive proximity switch for the riding step opening in the tailgate lower section in Haller X1 and X2 compactors

91175
Compatible with Haller original references 744424* / 752216*

Applicable to Haller X2 compactors.

Switch for the riding step detection in Haller X1 and X2 compactors.

Each Haller X2 needs 2 inductive proximity sensors, one for each riding step platform.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Inductive proximity switch for the tailgate articulation point in Haller X1 and X2 compactors

91176
Compatible with Haller original reference 323369*

Applicable to Haller X2 compactors.

Inductive switch for the tailgate opening detection in Haller X1 and X2 compactors.

Each Haller X2 needs 1 proxy switch placed on the right articulation point of the tailgate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Pedestal housing for the 16 poles connector on the tailgate right upper part in Haller X2 compactors

91777
Compatible with Haller original references 320392* / 320.392* / 320 392*

Applicable to Haller X2 compactors.

Box for the 16 poles power point assembly placed on the right upper part of Haller X1 and X2 compactors.

Each Haller X2 needs 1 pedestal housing for the connector.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

16 poles grommet insert placed on the right upper part of the tailgate in Haller X2 compactors

91779
Compatible with Haller original references 320391* /  320.391* /  320 391*

Applicable to Haller X2 compactors.

16 poles grommet insert placed on the right upper part of Haller X1 and X2 compactors.

Each Haller X2 needs 1 grommet insert.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Female bushing insert for 16 poles connector placed on the right upper part of Haller X2 compactors

91778
Compatible with Haller original references 320394* / 320.394* / 320 394*

Applicable to Haller X2 compactors.

Female bushing insert for 16 poles connector placed on the right upper part of Haller X1 and X2 compactors

Each Haller X2 needs 1 female bushing insert for the 16 poles connector.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Male pin insert for 16 poles connector placed on the right upper part of Haller X2 compactors

91780
Compatible with Haller original references 320393* / 320393* / 320393*

Applicable to Haller X2 compactors.

Male pin insert for 16 poles connector placed on the right upper part of Haller X1 and X2 compactors

Each Haller X2 needs 1 male pin insert for the 16 poles connector.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912