Haller X2 - Tailgate operation panel

In this section you will find all the elements related to the operation panel installed in the tailgate section of the Haller X2 RCV compaction trucks.

We can sell the complete control panels of the tailgate for Haller X2 compactors, as well as their spare parts.

We can offer the different press buttons, the electric contacts, the emergency stop button and the electric resistor.

Select the spare parts among the list of references you can find below or click on the menu on your left where your Haller compactor appears so that you could display a list of all the available spare parts for your machine.

If you cannot find on this website the parts you need, please contact our customer service at +34 968 676912 or send us an email to info@teclimur.es and we will help you locate the correct part for your Haller compactor.

 

 
Compatible with Haller original references 323432* / 323433* / 323.432* / 323.433* /323 432* / 323 433*

Applicable to Haller X2 compactors.

Complete panel including box, electric contacts and pressing buttons for the electric control unit placed on the left part of the roof, on the press hydraulic cylinders.

Each Haller X2 needs 1 complete press button combination on the left part.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323836* / 323.836* / 323 836*

Applicable to Haller X2 compactors.

Yellow pressing button for the ejection plate ejection operation.

Placed on the upper line of the rear button panel.

Each Haller X2 needs 1 ejection button.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323837* / 323.837* / 323 837*

Applicable to Haller X2 compactors.

Turning switch for the work lamp operation.

Placed on the upper part of the rear button panel.

Each Haller X2 needs turning switch.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323842* / 323.842* / 323 842*

Applicable to Haller X2 compactors.

Press button for the press compaction operation.

Placed on the middle part of the rear button panel.

Each Haller X2 needs 1 START button.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323847* / 323.847* / 323 847*

Applicable to Haller X2 compactors.

Press button for the press plate descent operation.

Placed on the middle part of the rear button panel.

Each Haller X2 needs 1 PRESS PLATE DOWN button.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323848* / 323.848* / 323 848*

Applicable to Haller X2 compactors.

Press button for the press plate lift operation.

Placed on the middle part of the rear button panel.

Each Haller X2 needs 1 press plate UP button.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323849* / 323.849* / 323 849*

Applicable to Haller X2 compactors.

Press button for the swivel plate lift operation.

Placed on the lower part of the rear button panel.

Each Haller X2 needs 1 swivel plate DOWN button.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Mushroom-type green pressing button for the swivel plate down movement in Haller X1 and X2 compactors

91794
 
Compatible with Haller original references 323850* / 323.850* / 323 850*

Applicable to Haller X2 compactors.

Press button for the swivel plate descent operation.

Placed on the lower part of the rear button panel.

Each Haller X2 needs 1 swivel plate DOWN button.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323841* / 323.841* / 323 841*

Applicable to Haller X2 compactors.

Press button for the emergency stop operation.

Placed on the lower part of the rear button panel.

Each Haller X2 needs 1 EMERGENCY STOP button.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323840* / 323.840* / 323 840*

Applicable to Haller X2 compactors.

Side protection guard for the involuntary operation of the buttons on the rear button panel.

Each Haller X2 needs 4 protections for the button panel.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323245* /  323.245* /  323 245*

Applicable to Haller X2 compactors.

Flange for the electric contacts and press buttons assembly on the rear button panel.

Each Haller X2 needs 8 flanges for the button assembly.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323249* / 323249* / 323249*

Applicable to Haller X2 compactors.

Switch element for the pressing buttons of the rear button panel.

Each Haller X2 needs 9 contact blocks.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323248* / 323248* / 323248*

Applicable to Haller X2 compactors.

Switch element for the pressing buttons of the rear button panel.

Each Haller X2 needs 9 contact blocks.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

 
Compatible with Haller original references 323542* / 323.542* / 323 542*

Applicable to Haller X2 compactors.

24 V resistor for the rear button panel.

Each Haller X2 needs 2 resistors on the rear button panel.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912