Complete control unit for the backpressure plate and the BV1 ejection plate

teclimur-cabecera-geesink
In this area we offer the complete control unit for the backpressure plate and the telescopic cylinder in Gesink GPM 2 compactors as well as the related spare parts.

We have a large stock of the suitable hydraulic control units for Geesink GPM II and GPM III compactors.

 

We can offer you the complete hydraulic operational unit for the ejection cylinder in Geesink GPM II compaction trucks.

You can also choose between the different components separately to repair your own hydraulic unit: alluminium hydraulic block, electrovalves, coils, couplings and the different connection components.

Due to the wide variety of spare parts, we recommend you to study the technical information shown on each spare part and, if needed, call us at +34 968 676912 or email us at info@teclimur.com and we will help you find the correct reference.

 

Complete control unit for the backpressure plate and the BV1 eyection cylinder in Geesink GPM II compactors

45956

Compatible with Geesink original reference 223351*

 

Applicable to Geesink GPM 2 compactor.

Complete control unit of the hydraulic cylinder in charge of the ejection plate ejection in Geesink GPM2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

 

2 mm choke cap for the ejection cylinder control block in Geesink GPM II compactors

46179

Compatible with Geesink original reference 946049*

 

Applicable to Geesink GPM 2 compactor.

2 mm diameter choke cap for the control valve installed on the control block of the hydraulic cylinder in charge of the ejection plate ejection in Geesink GPM2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Torique joints or seals kit for the overpressure relieve valve reference 02017062 in Geesink GPM II compactors

46173

Compatible with Geesink original reference 441850*

Applicable to Geesink GPM 2 compactor.

Torique seals or joints kit to repair the overpressure relief valve for the control valve installed on the control block of the hydraulic cylinder in charge of the ejection plate ejection in Geesink GPM2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Blind cap for the ejector hydraulic cylinder control block in Geesink GPM II compactors

46177

Compatible with Geesink original reference 223345*

 

Applicable to Geesink GPM 2 compactor.

Tightness blind cap to close the the control valve installed on the control block of the hydraulic cylinder in charge of the ejection plate ejection in Geesink GPM2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

SRV1 flow regulation valve for the backpressure plate and ejection plate control unit in Geesink GPM II compactors

46032

Compatible with Geesink original reference 943010*

Applicable to Geesink GPM 2 compactor.

SRV1 valve installed on the control block of the hydraulic cylinder in charge of the ejection plate ejection in Geesink GPM2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Male coupling threaded 3/8" for control unit hydraulic cylinder lifting tail section

46174
 

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Gasket set for valve overpressure relief reference 02017062

46175
 

Compatible with Geesink original reference 441850*

Applicable to Geesink GPM 2 compaction trucks.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Threaded plugs 38 for the control unit hydraulic cylinder lifting tail section in Geesink GPM 2 compactors

46176
 

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Plugs for the cylinder lifting control unit in Geesink GPM 2 compactors

47100
 

Compatible con referencia original Geesink 223345*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Plugs for the throttle valve in Geesink GPM 2 compactors

47101

Compatible con referencia original Geesink 943050*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

2 mm plugs for throttle hydraulic control unit in Geesink GPM 2 compactors

47102
 

Compatible con referencia original Geesink 946049*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.