Haller X2 - Pressing mechanism, swivel, guide plate and tail gate elevation

ø55x50 mm height 30 mm. expansive bushing for the swivel and guide plate hydraulic cylinder in Haller X2 compactors

91146
91146_haller_348243_219999_20160322163944
Compatible with Haller original references 348243* / 219999* / 348.243* / 219.999* / 348 243* / 219 999*

Applicable to Haller X2 compactors.

Expansive bushing for the pins of the 4 hydraulic cylinders that activate the swivel-guide plate section in Haller X2 compactors.

Each Haller X2 needs 8 bushings.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø74x30 mm pin for the tailgate elevation hydraulic cylinder in Haller X1 and X2 compactors

91114
Compatible with Haller original references 401030* / 5101059* / 401.030* / 510.1059* / 401 030* / 510 1059*

Applicable to Haller X1 and X2 compactors.

Pin for the eye rods of the hydraulic cylinders that activate the tailgate elevation movement in Haller X1 and X2 compactors.

Each Haller X1 or X2 needs 2 pins for the hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø30 mm articulated joint bearing without maintenance for the tailgate elevation cylinder in Haller X2 compactors

91124
Compatible with Haller original references 348033* / 348.033* / 348 033* 

Applicable to Haller X2 compactors.

Joint bearing for the eye rods of the hydraulic cylinders that activate the tailgate elevation movement in Haller X2 compactors.

Each Haller X2 needs 4 joint bearing of ø30 mm for the tailgate elevation hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø35x94 mm welded on plate upper pin for the tailgate elevation hydraulic cylinder in Haller X2 compactors

91125
91125_haller_397355_20160322163944
Compatible with Haller original references 397355* / 397.355* / 397 355*

Applicable to Haller X2 compactors.

Pin for the upper eye rods of the hydraulic cylinders that activate the tailgate elevation movement in Haller X2 compactors.

Each Haller X2 needs 2 equal pins for the tailgate elevation hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø127x50 mm double chamfer pin for the pivot point on which the tailgate swings in Haller X2 compactors

91122
Compatible with Haller original references 105040* / 105.040* / 105 040*

Applicable to Haller X2 compactors.

Articulation pin for the upper pivot point from which the tailgate elevation movement swings in Haller X2 compactors.

Each Haller X2 needs 2 equal pins for the tailgate pivot point.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Wear plate for rollers of the press in compactors Haller X2

91898
Compatible with Haller original reference 403724* / 5100880* / 125295* / 11HLP2001221* / 11HLO1001221*

Applicable to Haller X2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

60x316 mm upper pin for the guide plate in Haller X1 compactors

91893
 
Compatible with Haller original reference 401062*
For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Angular metal band for rear shovel in compactors Haller X2

91895
 

Compatible with Haller original reference 407273*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Covered with sheet metal in steel anti-wear 2100 x 1300 x 4 mm for scraper rear section in compactors Haller X2

91896
 
Compatible with Haller original reference 104193*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

2105 x 175 x 65 mm angular bar for scraper rear section in compactors Haller X2

91897
 
Compatible with Haller original reference 105098* / 101372*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Soporte pala acero compatible con compactadores Haller X2

91931

Compatible con referencia original 104597* / 104596* / 7000104597*

Para cualquier consulta o realizar un pedido contacte con nosotros a través del email info@teclimur.com o del teléfono 968 676912.