Suction system for Schmidt Swingo 200 sweepers

Rear boomerang slide for the suction mouth sliding in Schmidt Swingo sweerpers

60093

Compatible with Schmïdt original reference 15090019*

Boomerang-shaped slide for the rear side of the suction mouth gliding in Schmidt sweepers series Swingo.

Made of highly resistant plastic materials.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Front rubber flap for the suction mouth in Schmidt Swingo sweepers

67012
Compatible with Schmïdt original references 17039050 /17039090*

Rubber front flap to be installed on the front part of the suction mouth of Schmïdt sweepers series Swingo.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

17 mm. rubber flap for the suction mouth in Schmidt SK sweepers

67013
Compatible with Schmïdt original reference 15090139*

Applicable to Schmïdt SK sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Suction hose for Schmidt Swingo 200 sweepers

67037

Compatible with Schmïdt original references 12-17036435 / 1217036435 / 15090128 / 17036435*

Size 1350 x 205 mm.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Articulation pin for the suction mouth in Schmidt Swingo 200 sweepers

67062
29039137*
Compatible with Schmïdt original reference 29039137*

Pin for the front part of the sweeper support in Schmïdt Swingo sweepers.

Each sweeper needs 2 pins.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

3/4" locknut for the bended connector 63900059 of the suction nozzle central part in Schmidt Swingo 200 sweepers

67063

Compatible with Schmïdt original reference 97601549*

Locknut for the 90º connector fastening on the central part of the suction mouth in Schmïdt Swingo sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Special washer for the suction mouth in Schmidt Swingo 200 sweepers

67064

Compatible with Schmïdt original reference 98900927*

Fastening washer for the suction mouth in Schmïdt Swingo 200 sweepers.

Each sweeper needs 3 equal washers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

3/4" adapter for the suction nozzle in Schmidt Swingo 200 sweepers

67065
 

Compatible with Schmïdt original reference 97600117*

3/4" coupling for the bended coupling connection on the central part of the suction nozzle in Schmïdt sweepers series Swingo 200.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

3/4" bended connection element for the suction mouth in Schmidt Swingo 200 sweepers

67066
 
Compatible with Schmïdt original reference 97600182*

90º connection element to be fastened on the central part of the suction mouth in Schmïdt Swingo sweepers by means of the adapter reference 67065.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Hydraulic cylinder for the suction mouth gate in Schmidt Swingo 200 sweepers

67067
 

Compatible with Schmïdt original reference 1029018-8*

Hydraulic cylinder for the suction door elevation in Schmïdt sweepers series Swingo.

1 hydraulic cylinder is required for the suction mouth.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Nyloc nut for the rubber flap fastening in the suction mouth of Schmidt Swingo 200 sweepers

67068
 

Compatible with Schmïdt original reference 98112200*

Special nut for the rubber flap fastening of Schmïdt sweepers series Swingo 200 in the front part of the suction mouth.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

M8x35 screw with conic nut and washer for the front rubber flap fastening in the suction nozzle of Schmidt Swingo 200 sweepers

67069

Compatible with Schmïdt original references 1002001-4 /10020014 / 1038999-2 / 10389992*

Screw that fasten the rubber flap of the central part of the suction nozzle in Schmidt sweepers series Swingo.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Fastening plate for the front rubber flap of the suction nozzle in Schmidt Swingo sweepers

67070

Compatible with Schmïdt original reference 17039095*

Drilled metal plate for the front rubber flap fastening in the suction nozzle of Schmïdt Swingo sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Tongue for the front rubber flap fastening in Schmidt Swingo sweepers

67071

Compatible with Schmïdt original reference 17039052*

Curved tongue for the central rubber flap fastening in the front part of the suction nozzle in Schmidt Swingo 200 sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Hinge for the front rubber flap articulation in the suction nozzle of Schmidt Swingo 200 sweepers

67072
Compatible with Schmïdt original reference 17039061*

Hinge that articulates the front rubber flap of the suction nozzle in Schmidt Swingo 200 sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.