Schmidt Swingo - Brushes for the sweeping system

Alternative hydraulic cylinder for the elevation of the brushes support arm in Schmidt Swingo 200 sweepers

67057

Compatible with Schmïdt original reference 90104003*

Hydraulic cylinder in charge of the front brush elevation in Schmidt Swingo sweepers.

The parallel cylinder on the lower part of the arm that holds the brush.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Pin with chain for the brush support arm in Schmidt Swingo 200 sweepers

67058
Compatible with Schmïdt original reference 17038049*

Pin with chain to be installed on the support arm of the brush hydraulic motor in Schmidt Swingo 200.

Each sweeper needs one chain on every arm.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Support for the pin with chain for the brush support arm in Schmidt Swingo 200 sweepers

67059
Compatible with Schmïdt original reference 17038016*

The support element of the brush arm where the pin with chain is connected in Schmidt Swingo sweepers.

Each sweeper needs 1 support for every arm.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Separating element with pipe for the side brush support arm in Schmidt Swingo 200 sweepers

67060
Compatible with Schmïdt original reference 17038044*

Separating element to be assembled on the arm that holds the front brushes in Schmidt Swingo 200 sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Cover lid for the brushes support arm in Schmidt Swingo sweepers

67061
 
Compatible with Schmïdt original references 97502260 / 0226968-6 / 12-97502260*

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

M10 eye rod for the gas shock absorber of the brushes arm in Schmidt Swingo sweepers

67034

Compatible with Schmïdt original reference 97000025*

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Left support element for the gas shock absorber assembly of the brushes arm in Schmidt Swingo sweepers

67035
 

Compatible with Schmïdt original reference 17038035*

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Right support element for the gas shock absorber assembly of the brushes arm in Schmidt Swingo sweepers

67036
Soporte derecho para montaje de amortiguador de gas para el brazo de los cepillos en barredoras Schmidt Swingo.Compatible con referencia original Schmïdt 17038036*

Compatible with Schmïdt original reference 17038036*

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Structure element for the support of the brush arm hydraulic motor in Schmidt Swingo 200 sweepers

67001
 

Compatible with Schmïdt original reference 17038014*

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

TMR200 hydraulic motor with reinforced seal for a high pressure cubic capacity (200 c.c.) and with sprung axle in Schmidt Swingo / Classic 3 / SK 151 / SK153 sweepers

60053

Compatible with Schmïdt original references 1004376-7* / 10043767*

Reinforced seal hydraulic motor for the sweeping brushes operation in Schmidt sweepers, series Swingo / Classic 3 / SK151 / SK 153.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Bulón con pletina soldada para articulación cilindro basculante brazo de los cepillos en barredora Schmidt Swingo 200

67196

Compatible con referencia original Schmidt 12-15110215* / 1215110215*

Aplicable a barredoras Schmïdt Swingo.

Para cualquier consulta o realizar un pedido contacte con nosotros a través del correo info@teclimur.com o del teléfono 968 676912.

Rótula M18 rosca corta para el brazo del cilindro hidráulico basculante de los cepillos en barredoras Schmidt Swingo 200

67197
Compatible con referencia original Schmidt 12-17038021* / 1217038021*

Aplicable a barredoras Schmïdt Swingo.

Para cualquier consulta o realizar un pedido contacte con nosotros a través del correo info@teclimur.com o del teléfono 968 676912.

Brazo limpiaparabrisas para barredoras Schmidt Swingo 200

67198
 

Compatible con referencia original Schmidt 12-17011134* / 1217011134*

Aplicable a barredoras Schmïdt Swingo.

Para cualquier consulta o realizar un pedido contacte con nosotros a través del correo info@teclimur.com o del teléfono 968 676912.

Conjunto eje limpiaparabrisas derecho en barredoras Schmidt Swingo 200

67199
 

Compatible con referencia original Schmidt 12-17011134* / 1217011134*

Aplicable a barredoras Schmïdt Swingo.

Para cualquier consulta o realizar un pedido contacte con nosotros a través del correo info@teclimur.com o del teléfono 968 676912.

Brazo paralelo limpiaparabrisas izquierdo en barredoras Schmidt Swingo 200

67200
 

Compatible con referencia original Schmidt 12-17011135* / 1217011135*

Aplicable a barredoras Schmïdt Swingo.

Para cualquier consulta o realizar un pedido contacte con nosotros a través del correo info@teclimur.com o del teléfono 968 676912.