Geesink - Spare parts for the rear section and press

M12 ø40x80 mm. hinge pin for the tailgate upper pivot point articulation and the lower articulation in Geesink GCB 1000 / GEC 2510 bin lifters

45336

Compatible with Geesink original reference 222237*

 

Applicable to Geesink GPM 2 compactors.

Pin on which the tailgate is articulated in Geesink GPM 2 compactors to perform the elevation.

Size 80x40 mm. Thread M12.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

M12 ø35x125 mm. hinge pin for the two opposite sites of the yoke cylinder in Geesink GPM II and GPM III

45345

Compatible with Geesink original reference 222705*

 

Applicable to Geesink GPM 2 and GPM 3 compactors.

Pin size: Diameter 35 mm. Length 125 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø40x125 mm. M12 hinge pin for the joint of the ejector cylinder with the ejection plate in Geesink GPM II compactors

45332

Compatible with Geesink original reference 222051*

 

Applicable to Geesink GPM 2 compactor.

Length 125 mm. Diameter 40 mm.

Pin that connects the ejector plate to the super structure by means of the hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø30x59 mm. pin for the extension adapter of the tailgate elevation hydraulic cylinder in Geesink GPM II compactors with high bodywork

45436

Compatible with Geesink original reference 224094*

 

Applicable to Geesink GPM 2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø80x335 mm. hinge pin with lubrication hose for the interconnection between the special length yoke and the press plate in Geesink GPM II compactors

45334

Compatible with Geesink original reference 222117*

 

Applicable to Geesink GPM 2 compactors.

Diameter 80mm. Length 335mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø80x290 mm. pin with lubrication hose for the interconnection between the swivel and the yoke in Geesink GPM II and GPM III compactors

45383

Compatible with Geesink original references 223115 / 222115*

 

Applicable to Geesink GPM 2 and GPM 3 compactors.

Diameter 80mm. Length 290mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø35x155 mm. pin without lubrication hose for the yoke cylinder in Geesink GPM II compactors

G12036

 

Applicable to Geesink GPM 2 compactors.

Length 155 mm. Diameter 35 mm. Thread M12.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

70x82x40 mm. bushing for Geesink GPM II compactors

G12035

Applicable to Geesink GPM 2 compactor.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

39x35x50 mm glacier bushing for the yoke hydraulic cylinder eye rods in Geesink GPM 3 compactors

45666

Compatible with Geesink original reference 308000*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Glacier bearing bushing. 40 mm. diameter. 30 mm. height. For the upper articulation point of the tailgate in Geesink GPM 2 compactors

45671

Compatible with Geesink original reference 308008*

 

Applicable to Geesink GPM 2 compactors.

Casquillo sobre el que se articula el conjunto trasero para relizar la elevación en compactadores Geesink GPM 2.

Size 40x30 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Bearing bushing for the press plate pin in Geesink compactors

G12031

Size 70x45x40 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

60x55x60 mm. glacier bushing for the swivel hydraulic cylinder eye rods in Geesink GPM II and GPM III compactors

45777

Compatible with Geesink original reference 308021*

 

Applicable to Geesink GPM 2 and GPM 3 compactors.

Length 60 mm. Diameter 55 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

84-80x 40mm.expansive glacier bushing for the upper interconnection between the yoke and the swivel blade in Geesink GPM II and GPM III compactors

45676

Compatible with Geesink original reference 308017*

 

Applicable to Geesink GPM 2 and GPM 3 compactors.

Diameter 80-85mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

39x35x50 mm. glacier bushing for the yoke hydraulic cylinder eye rods in Geesink GPM II compactors

45666

Compatible with Geesink original reference 308000*

 

Applicable to Geesink GPM 2 compactors.

Diameter 39/35 mm. Length 50 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

34x30x40 mm expansive glacier bushing for the tailgate elevation hydraulic cylinder eye rod in Geesink GPM 2 and GPM 3 compactors

45670

Compatible with Geesink original reference 308007*

Size 34x30x40 mm. Applicable to the piston eye rod reference 02012027*

 

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.