Geesink - Spare parts for the rear section and press

Manual lock for the rear skirts in Geesink GPM 3 compactors

46277
Compatible with Geesink original reference P602041-1* / P6020411*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Nut 12 for threaded coupling reference 45966 for introduction of the electric cable at the base of the yoke in compactors Geesink

46287

Compatible with Geesink original reference 502102*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Wear to the yoke plate in compactors Geesink

46294
Compatible with Geesink original reference 230015*
Metal block for repair of the top yoke in compactors Geesink GPM2 and 3 GPM.

Each compactor Geesink GPM 2 and 3 GPM need 2 plates of repair to the yoke.

 

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Ring Seeger 35 x 1, 5 DIN471 for hydraulic cylinder bolt tail section opening in compactors Geesink GPM 3

46259

Compatible with Geesink original reference 302144*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Pin for hydraulic cylinder lifting tail section in compactors Geesink GPM 3

46260

Compatible with Geesink original reference 600884-1*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Pin ø5x63 mm mechanism top pin lock tail section in compactors Geesink GPM 3

46261

Compatible with Geesink original reference 810014*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Washer DIN125 M24 mechanism top pin lock tail section in compactors Geesink GPM 3

46262

Compatible with Geesink original reference 809031*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Upper pin o25x68 mm mechanism tail section blocking in compactors Geesink GPM 3

46263

Compatible with Geesink original reference 600887-1* / 6008871*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Pin for the mechanism lock tail section in compactors Geesink GPM 3 xx25

46264

Compatible with Geesink original reference 600174-1* / 6001741*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Guide plate to lock lifting system tail section in compactors Geesink GPM 3

46265

Compatible with Geesink original reference 600172-1* / 6001721*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Hex head screw to lock lifting system tail section in compactors Geesink GPM 3

46266

Compatible with Geesink original reference 812044*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

M10 flat washer to lock lifting system tail section in compactors Geesink GPM 3

46267

Compatible with Geesink original reference 819025*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

1690 x 165 x 6 mm loading sill for slip in elevacontenedores Geesink

46270

Compatible with Geesink original reference 401757*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Cap 82 x 70 x 40 mm in steel for compacters Geesink GPM 2

46313
 

Compatible with Geesink original reference P049-7*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Support for closure tailgate in compactors Geesink

46314

Compatible with Geesink original reference P600879-1* / P6008791*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.